| 開發人員: | Mobiltex Data Ltd. (9) | ||
| 價錢: | 免費 | ||
| 排名: | 0 | ||
| 評測: | 0 寫評論 | ||
| 清單: | 0 + 0 | ||
| 點數: | 0 + 0 ¡ | ||
| Google Play | |||
描述
Contact us at 'sales.rmu3@mobiltex.com' to purchase.
This app is for configuring the corTalk® RMU3 (Remote Monitoring Unit 3) with the new RBT1 Bluetooth interface cable. The cable functions as a complete RMU3 programming interface but only requires the Bluetooth connection of your phone. The RMU3 is used to monitor a cathodic protection rectifier with accurate measurement of a wide variety of signals; it can also control the rectifier for survey operations by switching a relay at precisely timed intervals. This app allows access to diagnostic information on the RMU3 and allows setting up the configuration to meet the customer's needs. Note that measurement data logs, due to their size, can only be extracted from the RMU3 using the PC configuration application through the USB port.
The app allows full configuration of the RMU3 including
- slot measurement types
- limits
- slot scaling and offset
- relay options
- instant off timing
- interruption On/Off/Cycle
Other features include the
- viewing of readings and their limits
- detailed status screen for troubleshooting
- integrated manual
- wiring diagrams for each measurement type
The RBT1 is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the app or reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet. Once paired, the Android device can reconnect without needing to re-enter the code.
螢幕擷取畫面
新功能
- 版本: 1.1.11
- 發佈日期:
價錢
- 今天: 免費
- 最小值: 免費
- 最大值: 免費
追蹤票價
開發人員
- Mobiltex Data Ltd.
- 平台: Android 應用程式 (9)
- 清單: 0 + 0
- 點數: 0 + 0 ¡
- 排名: 0
- 評測: 0
- 折扣: 0
- 影片: 0
- RSS: 訂閱
點數
未找到 ☹️
排名
未找到 ☹️
清單
未找到 ☹️
評測
成為第一個評論 🌟
其他資訊
- 版本: 1.1.11
- ID: com.mobiltex.rmu3config
- 類別 :
Android 應用程式›生產應用 - OS:
Android 8.0 - 大小:
26 Mb - 內容分級:
Everyone - Google Play 評分:
0 - 發佈日期:
- 發行日期:
http://www.mobiltex.com/products/rmu3/index.html你可能還喜歡
-
- Rhino Config
- Android 應用程式: 生產應用 由: Rhino Mobility
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.22.0 The Rhino Mobility Config application offers a number of EMM-independent configurations for the granular management of Rhino, and Rhino-based devices. Following import, configurations ... ⥯
-
- KLOCKNOW FACE CONFIG
- Android 應用程式: 生產應用 由: BRONX Technology
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.6 - KLOCKNOW FACE CONFIG is a SAAS Based Human Resource Application on the Cloud - KLOCKNOW FACE CONFIG works with Face Recognition Device. Our goal is to provide the best possible Clock ⥯
-
- Epson Projector Config Tool
- Android 應用程式: 生產應用 由: Seiko Epson Corporation
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 40 (4.1) 版本: 1.2.1 Epson Projector Config Tool is an app that allows you to change projector settings and check information using NFC wireless communications technology. By simply holding an ... ⥯
-
- Protege Config
- Android 應用程式: 生產應用 由: Integrated Control Technology
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.0.5 Protege Config provides the ability for installers to configure ICT TSEC readers(requires firmware version 1.04.254 or higher) without the need for extra hardware. Configurations can ... ⥯
-
- rRuf-config
- Android 應用程式: 生產應用 由: Rival Solutions
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: New rRuf-config is a mobile application that allows users to pair their phone to another BLE device. Then, a bluetooth communication can be establish to send wifi configurations to that ... ⥯
-
- COEL CONFIG
- Android 應用程式: 生產應用 由: Coelmatic Ltda.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.3.2 COEL CONFIG is an application aimed at configuring devices from the COEL temperature line with wireless communication. Through Bluetooth and NFC technologies, it´s possible to read the ⥯
-
- Quick Config
- Android 應用程式: 生產應用 由: Siemens AG
- 免費
- 清單: 1 + 0 排名: 0 評測: 0
- 點數: 1 + 0 版本: 1.0.7 Professional commissioning tool for Siemens devices allowing fast and easy setting on thermostats, sensors, actuators and other devices. It allows to: 1. Read and Write Parameters ... ⥯
-
- uGI1 Config
- Android 應用程式: 生產應用 由: Mobiltex Data Ltd.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.5 Requires a corTalk® uGI1 (v1.02 or higher) to use. Contact us at 'sales.ugi1@mobiltex.com' to purchase. This app is for configuring the uGI1 (Micro GPS-enabled Interrupter 1). The uGI1 ⥯
-
- 619 Config
- Android 應用程式: 生產應用 由: Dometic Group AB
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.6.28 A production or warranty tool, write or rewrite configuration parameters to CFX3: Bluetooth pairing with the device by scanning the QR code on HMI Scan the QR code on CFX3 rating label ⥯
-
- Honeywell Versatilis Config
- Android 應用程式: 生產應用 由: Honeywell International, Inc.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.1.6.4 Honeywell Versatilis is next generation smart and flexible solution for configuring, calibrating, monitoring, and diagnosing any HART, Modbus and Honeywell Digitally Enhanced (DE) ... ⥯
-
- TagID Config
- Android 應用程式: 生產應用 由: Fronius International GmbH
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.0.82139 The app is used to configurate the TagID with all relevant battery data. The TagID is a Fronius developed electronic product which is installed on lead acid batteries and operates as ... ⥯
-
- ST Config
- Android 應用程式: 生產應用 由: Sonim Technologies, Inc
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 14.1.1.2 Enterprise app, which can be used by enterprise IT admin to configure the device remotely. These configuration bundles can be passed by any EMM to the designated OEMConfig application, ⥯
-
- Document Reader : PDF Creator
- Android 應用程式: 生產應用 由: Solo Tech Apps
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 2 + 166,541 (4.3) 版本: 7.0.8 Document viewer, file viewer allow you to view and read all document files on your mobile. Docx reader and viewer is the smallest size (less than 8 MB) and all-in-one complete free ... ⥯
-
- RMU Commander
- Android 應用程式: 生產應用 由: Andrei Lomtev
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 1 + 0 版本: 1.1 RMU commander is a client for corview.cloud platform that allows to send "ON", "OFF" and "Continuous interruption" commands to RMU3. Features: 1. Auto-login - save login credentials on ⥯