| مطوّر البرامج: | Brain_trapp (13) | ||
| السعر: | * * مجاني | ||
| لتصنيفات: | 0 | ||
| المراجعات: | 0 أكتب مراجعة | ||
| قوائم: | 0 + 0 | ||
| النقاط: | 0 + 319,090 (4.5) ¡ | ||
| Google Play | |||
الوصف
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
لقطات
الميزات الجديدة
- الإصدار: v4.35.8
- تم التحديث:
- v4.35.8
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
السعر
-
* تتضمن إعلانات* عمليات الشراء داخل التطبيق - اليوم: مجاني
- الحد الأدنى: مجاني
- الحد الأقصى: مجاني
تتبّع الأسعار
مطوّر البرامج
- Brain_trapp
- المنصات: Android تطبيقات (13)
- قوائم: 0 + 0
- النقاط: 2 + 329,173 ¡
- لتصنيفات: 0
- المراجعات: 0
- تخفيضات: 0
- أشرطة فيديو: 0
- RSS: اشتراك
النقاط
غير معثور عليه ☹️
لتصنيفات
غير معثور عليه ☹️
قوائم
غير معثور عليه ☹️
المراجعات
كن الأول لمراجعة هذا المنتج 🌟
معلومات إضافية
- الإصدار: v4.35.8
- ID: com.gombosdev.ampere
- الفئة:
Android تطبيقات›الأدوات - نظام التشغيل:
Android 6.0 - الحجم:
23 Mb - تقييم المحتوى:
Everyone - Google Play تقييم:
4.5(319,090) - تم التحديث:
- تاريخ الإصدار:
جهات الاتصال
- الموقع الإلكتروني:
https://project-9114377732102489723.firebaseapp.com/
قد يعجبك ايضا
-
- Ampere
- Android تطبيقات: الأدوات بواسطة: Ampere Tech
- مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 158 (1.7) الإصدار: 1.6 The Ampere App amps up the functionality of Ampere products like Shower Power and Dusk. In addition, the app allows customers to register products, join our membership program, and ... ⥯
-
- Ampere and charger tester
- Android تطبيقات: الأدوات بواسطة: AppsLib
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 0 الإصدار: 1.10.1 Ampere and Charger Tester, your trusty sidekick for tracking your device's charging performance in style! Key Features : Real-Time Charging Info: Curious about how your device is ... ⥯
-
- Ampere : Charger Tester
- Android تطبيقات: الأدوات بواسطة: toolso
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 0 الإصدار: 1.3 Bad Charger can cause damages to your phone, If the charging current is too high then it can effect your phones battery in bad ways. Did you ever felt, that one Charger/USB cable set ... ⥯
-
- Ampere Pro - Battery Health
- Android تطبيقات: الأدوات بواسطة: nanegate
- * * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 2 + 0 الإصدار: 3.9 Ampere Pro Real-Time Battery Health & Power Monitor Ampere Pro is a precise and feature-rich battery monitoring app that helps you track your device s battery performance, charging ... ⥯
-
- Ampere Meter : Battery Chargin
- Android تطبيقات: الأدوات بواسطة: BRB Apps
- * * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 422 (3.4) الإصدار: 1.29 Ampere meter will inform you that how much mAH charging current is being received when you will put on charge your phone. It will give you many information of your device battery ... ⥯
-
- Ampere Battery Charging Meter
- Android تطبيقات: الأدوات بواسطة: Stupendous Andro
- * * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 884 (3.0) الإصدار: 1.8 While charging your phone this app will inform you that how much mAH charging battery current is received and battery information. Ampere Meter is battery current measure to know the ... ⥯
-
- Ampere Meter (Charging Ampere)
- Android تطبيقات: الأدوات بواسطة: robin android
- مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 189 (3.0) الإصدار: 1.0 It measures the charging current Try to check if charging is slow measuring the charging current For fast charging will be measured more than 1.0 A If the charging current is "-. A" is ⥯
-
- Ampere Battery Info
- Android تطبيقات: الأدوات بواسطة: Codelaby
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 296 (4.1) الإصدار: 0.2.7 Get real-time battery values for your device, check the charging or discharging status, and the type of charging system - USB port, wireless charging pad, or power adapter. Our app ... ⥯
-
- Ampere viewer
- Android تطبيقات: الأدوات بواسطة: israel develop
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 0 الإصدار: 1.5 this app is for a use to see how fast your battery get current we display it in mAh and watts see all the data you need from your battery ⥯
-
- Battery Charger Taster: Ampere
- Android تطبيقات: الأدوات بواسطة: Battery Pro Apps
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 1 + 754 (4.1) الإصدار: 1.2.4 Introducing Ampere Meter - Battery Monitor, showcases battery usage details and determines battery capacity (mAh) through scientific methods.. CHARGE SPEED With Ampere Meter, you can ... ⥯
-
- Charger Tester & Ampere Meter
- Android تطبيقات: الأدوات بواسطة: Minim Dev.
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 700 (4.3) الإصدار: 2.0.1 Are you tired of guessing how fast your device is charging or wondering whether your charger is delivering the advertised amperage? Say goodbye to the uncertainty with the Ampere Meter ⥯
-
- Battery Ampere Monitor
- Android تطبيقات: الأدوات بواسطة: Nguyễn Thị Mai Trang
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 0 الإصدار: 2.1 ️ Disclaimer Battery Ampere Monitor uses software-based algorithms to retrieve information about your battery s charging/discharging current and health status. All readings are for ... ⥯
-
- AmpereFlow: Battery Speed, AOD
- Android تطبيقات: الأدوات بواسطة: Androxus
- * * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 0 + 44,754 (4.6) الإصدار: 1.5.9 Essential battery stats: Charge speed, battery health, and AOD animations AmpereFlow turns your Always on display into an accurate battery charging meter with ampere and watts ... ⥯
-
- Amps & Watts Calculator
- Android تطبيقات: الأدوات بواسطة: Furyload
- * مجاني
- قوائم: 0 + 0 لتصنيفات: 0 المراجعات: 0
- النقاط: 1 + 0 الإصدار: 1.1.3 Ampere and Watt Calculator is a small tool for converting between watts and amps based on the specified and required voltages. What do you benefit from this application? 1-Convert ... ⥯