مطوّر البرامج: Precitec GmbH & Co. KG (3)
السعر: مجاني
لتصنيفات: 0 
المراجعات: 0 أكتب مراجعة
تعليقات: 0 انشر تعليقًا
قوائم: 0 + 0
النقاط: 0 + 0 ¡
Google Play

الوصف

Precitec ProCutter
The Precitec ProCutter App is used to display the cutting head condition during operation and to query error messages. As an option the app can also be used to set some sensor value parameters. The app connects via Bluetooth with the laser head and shows the sensor values in different windows. There are seven different windows: connection, temperature, pressure, optics, errors, IO and system.

• Connection: shows active Bluetooth devices in the network
• Temperature: shows the sensor values of the four temperature sensors
• Pressure: shows cutting gas pressure and purging air pressure
• Optics: looks different, because of different laser head types
- Normal: focal positions, potentiometer offset, diffused light, lens configuration.
- ZoomCutter: aspect ratio replaces the lens configuration.
- Manual: just diffused light is shown.
• Errors: shows active error messages. If no error exists, the screen is empty.
• IO: shows the IO-interface, with analogue voltages, currents and signals.
• System: laser head firmware version and serial number.

Besides, in the system window there is a button. This button starts the record of the measurement values. The measurement values are stored in a *.csv file, which is created in the memory of the used device. The App has two access modes, USER and OEM. The determination is regulated through two different PINs. Users with USER-rights can define the memory location and the sampling rate of the .csv file. Besides the USER can change his own PIN. The OEM can additionally configure thresholds for the laser head. Furthermore the OEM can change his own and the USER-PIN.

The functionality of the app could be restricted, because of different laser head firmware versions. The IO window is not supported with firmware lower than 2.0.0. Also the one-time PIN algorithm is not supported for firmware versions below 2.0.3. With this algorithm a one-time change of your PIN is possible, when the PIN was forgotten or wrong entered.

The App works just as a display when the laser head is connected through CAN. It is not possible to change any thresholds with the App and the IO window is hidden.

The manuals in English and German versions are delivered in the pdf-format within the app. During the first start of the app, after approving the GTC, both versions of the manuals will be stored in the download-section of the used device. Besides it is possible to open the manual in the settings of the app. Depending on the used language in the device the German or English version will be shown. To display the manuals a pdf-viewer is required.
مزيد ↓
Ad

لقطات

#1. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#2. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#3. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#4. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#5. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#6. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#7. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG
#8. Precitec ProCutter (Android) بواسطة: Precitec GmbH & Co. KG

الميزات الجديدة

  • الإصدار: 3.3.7
  • تم التحديث:

تاريخ الأسعار

  • اليوم: مجاني
  • الحد الأدنى: مجاني
  • الحد الأقصى: مجاني
تتبّع الأسعار
Ad

مطوّر البرامج

النقاط (0)

0 ☹️

لتصنيفات (0)

0 ☹️

قوائم (0)

0 ☹️
  • Precitec ProCutter

المراجعات (0)

كن الأول لمراجعة هذا المنتج 🌟

تعليقات (0)

كن أول من يعلق 🌟

معلومات إضافية

جهات الاتصال

«Precitec ProCutter». منصة: Android. الفئة: الأدوات. المطور: «Precitec GmbH & Co. KG». الإصدار الأول: . التحديث الأخير: . السعر الحالي: مجانا. لم يتلق هذا العنوان تقييمات أو مراجعات بعد على AppAgg. يتتبع AppAgg سجل الأسعار والتقييمات وتعليقات المستخدمين «Precitec ProCutter». متابعة الخصومات والتحديثات القادمة: RSS. لا يستضيف AppAgg التطبيقات أو يوزع البرامج. جميع العلامات التجارية والشعارات ولقطات الشاشة مملوكة لأصحابها.
Precitec ProCutterPrecitec ProCutter عنوان URL مختصر: تم النسخ!
  • 🌟 مشاركة
  • Google Play

قد يعجبك ايضا

    • Precitec ProCutter 2.0 Firmwar
    • Android تطبيقات: الأدوات  بواسطة: Precitec GmbH & Co. KG
    • مجاني  
    • قوائم: 0 + 0  لتصنيفات: 0  المراجعات: 0
    • النقاط: 0 + 0  تعليقات: 0  الإصدار: 2.0.5   The Firmware Update App is used to update ProCutter Standard and ProCutter ZOOM using an encrypted firmaware file. The connection is via WLAN and has the same requirements as the ...
        ⥯ 
    • Precitec ProCutter 2.0
    • Android تطبيقات: الأدوات  بواسطة: Precitec GmbH & Co. KG
    • مجاني  
    • قوائم: 0 + 0  لتصنيفات: 0  المراجعات: 0
    • النقاط: 0 + 0  تعليقات: 0  الإصدار: 2.2.3   The Precitec ProCutter 2.0 App is used to visualize the state of the laser head during operation, to query error messages and to set the customer offset. Optionally, the app can also ...
        ⥯ 

قد يعجبك ايضا

عوامل تشغيل البحث التي يمكن استخدامها مع AppAgg
إضافة إلى AppAgg
AppAgg
ابدأ بإنشاء حساب - انه مجاني.
تسجيل
تسجيل الدخول