説明
via the phone or tablet’s USB port.
The phone or tablet must support USB-Host Mode a.k.a USB On-The-Go (USB-OTG),
and a USB-OTG cable is required.
Typical use-cases for this app are:
● Controlling an IoT device like an Arduino, ESP32, etc
● Controlling a communication device such as a router that has a serial console connector (this may require a USB to RS232 converter cable)
UsbTerminal is open-source. See https://github.com/liorhass/UsbTerminal
Features:
● Support devices with the following USB to Serial protocols/chips: CDC-ACM (e.g. Arduino Uno R3), FTDI (FT232R, FT232H, FT2232H, FT4232H,
FT230X, FT231X, FT234XD), Prolific PL2303, CH34x, Silabs CP210x (e.g. ESP32 dev boards from Espressif)
● Support two keyboard input modes:
1. Auto - Like on a “real” terminal, there is no dedicated input field. Characters are sent to the serial device immediately as keys are clicked on the keyboard. This is the default mode.
2. Dedicated input field - Keyboard input goes to a dedicated input field and is sent to the device only after a “Send” button is pressed.
● Partial support of ANSI/VT100 escape sequences including text coloring
● Two display modes: Text and Hex
● Background communication - the app can maintain connection and
continue receiving data even when it is in the background
● Log sessions to files. These log files can then be viewed or shared in
order to be analyzed with external tools
● Sending control character (e.g. Ctrl-C)
● Controlling of DTR and CTS
● Large scroll-back buffer
● Blinking cursor
● Status line indicating connection state, error messages, screen size,
cursor location and display mode
● Built-in help
● Built-in shortcuts to reset an Arduino and ESP32 dev boards
● No root required
● No special permissions required
A note to Arduino users:
One advantage of UsbTerminal is the way it handles DTR. Typically when an Arduino board is connected to a PC, it will reboot every time a terminal emulator application is connected to it. This is because the PC drops the DTR signal low whenever a connection is formed, and Arduino is designed to reset when DTR line is dropped low. UsbTerminal on the other hand, doesn’t automatically set or reset the DTR signal. When you connect a phone or tablet to an Arduino and open UsbTerminal, your Arduino continues whatever it was doing at the time. If you want it to reboot, you can easily control the DTR signal from UsbTerminal with a dedicated button.
Ad
スクリーンショット
価格
- 今日: フリー
- 最小値: フリー
- 最大: フリー
料金のチェック
デベロッパー
- Lior Hass
- プラットフォーム: Android アプリ (4)
- リスト: 0 + 0
- ポイント: 0 + 452 ¡
- ランキング: 0
- レビュー: 0
- 割引: 0
- 動画: 0
- RSS: 購読する
Ad
ポイント
0 ☹️
ランキング
0 ☹️
リスト
0 ☹️
- UsbTerminal
レビュー
最初のクチコミを書こう 🌟
情報
- バージョン: 2.0.25
- カテゴリ:
Android アプリ›ツール - オペレーティング システム:
Android 7.1 - サイズ:
25 Mb - コンテンツのレーティング:
Everyone - Google Play 評価:
4.0(452) - アップデート:
- リリース日:
連絡先
https://github.com/liorhass/UsbTerminalUsbTerminal 短縮 URL: コピーしました!- 🌟 シェア
- Google Play
あなたも好きかも
-
- USB Terminal
- Android アプリ: ツール 作者: SerialCloud
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 0 バージョン: 1.1.0 USB Terminal is a powerful and user-friendly application designed to connect USB devices for seamless serial communication. Whether you are working on debugging, monitoring, or data ... ⥯
-
- USB Terminal/Graphics
- Android アプリ: ツール 作者: Emrecan ÇETİN
- * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 1 + 0 バージョン: 1.02 This is a kind of USB Serial Terminal application that contains some graphics. Also there is a serial monitor in it. You can use this app with Arduino or another microcontroller for ... ⥯
-
- USB Terminal (Open Accessory)
- Android アプリ: ツール 作者: Jorge Prado
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 0 バージョン: 2.0 USB Testing - Professional USB Communication Tool Powerful USB communication app for developers, engineers, and makers working with Arduino, Raspberry Pi, and custom USB devices. Key ... ⥯
-
- Serial USB Terminal
- Android アプリ: ツール 作者: Kai Morich
- * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 2,454 (4.3) バージョン: 1.57 'Serial USB Terminal' is a line-oriented terminal / console app for microcontrollers, arduinos and other devices with a serial / UART interface connected with a USB to serial converter ⥯
-
- Arduino USB Terminal (Open)
- Android アプリ: ツール 作者: superus8r
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 169 (4.3) バージョン: 0.9.88899 This is an open-source app that allows sending commands to an Arduino device through USB cable. You need an Arduino to use this app (Arduino clones are also supported)! Simply connect ... ⥯
-
- ZTerminal - USB Terminal
- Android アプリ: ツール 作者: REDZ Smart Communication
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 90 (4.6) バージョン: 2.0.0 ZTerminal software lets you use USB to Serial Converters based on FTDI and Prolific chips independent from converter manufacturer and control devices used in industry such as Modems, ... ⥯
-
- USB Driver for Android Devices
- Android アプリ: ツール 作者: HEXAMOB S.L.
- * * フリー
- リスト: 1 + 0 ランキング: 0 レビュー: 0
- ポイント: 2 + 239,567 (4.3) バージョン: 3.76 USB Drivers for Android Connect Android to PC for Windows, Mac OS and Linux Find the correct USB driver information for Android devices and connect your smartphone safely to a computer ⥯
-
- USB Endoscope app Android 10+
- Android アプリ: ツール 作者: Easy Connect Apps
- * * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 3 + 86,856 (3.6) バージョン: 18-feb2026 How to connect an USB camera: Simply connect the USB camera to your smartphone's USB port. When the dialog appears, tick and press OK. It's all. You can only connect those USB cameras ... ⥯
-
- USB OTG Checker: USB Connector
- Android アプリ: ツール 作者: The App Company INC
- * * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 1 + 4,415 (2.8) バージョン: 2.7 Manage Your USB Files Easily with OTG Connector The Ultimate USB OTG File Manager for Android! Looking for a fast and easy way to access your USB drive on your Android phone? USB OTG ... ⥯
-
- USB Connector : OTG USB Driver
- Android アプリ: ツール 作者: Era Apps Studio
- * * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 1 + 1,626 (2.6) バージョン: 3.8 OTG Connector Software For Android or USB Connector and OTG File Manager is the most advanced and simple USB OTG Explorer to Transfer File from OTG to your Android Device or from your ... ⥯
-
- USB screen cast HDMI connector
- Android アプリ: ツール 作者: Mergalo
- * * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 2,580 (3.6) バージョン: 1.2.7 You can cast a small phone screen to a large TV screen in good resolution and quickly with the aid of screen mirroring, or All Mirror. On the huge screen, it's simple to access all ... ⥯
-
- USB OTG Checker
- Android アプリ: ツール 作者: 3 Sixty Development
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 0 バージョン: 2.1 USB OTG Checker helps to check the compatibility with USB OTG devices. OTG or on the go USB devices can be used in the USB port of the phone via OTG USB cable. This app will help you ... ⥯
-
- Terminal, Shell for Android
- Android アプリ: ツール 作者: A389 St.
- * * フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 560 (3.5) バージョン: 2026011012r Terminal, Shell for AndroidTerminal, Shell,Command Line for android has features : +) Typing command line,shell bash, Terminal for android devices + Full Linux terminal emulation. + ... ⥯
-
- USB Link
- Android アプリ: ツール 作者: Sunshine iotronics
- フリー
- リスト: 0 + 0 ランキング: 0 レビュー: 0
- ポイント: 0 + 0 バージョン: 1.0.3 USB Link is an Android app that connects to and monitors USB CDC devices (customly made ). It lets you: Discover and connect to USB devices via USB OTG Send commands and receive ... ⥯