描述
via the phone or tablet’s USB port.
The phone or tablet must support USB-Host Mode a.k.a USB On-The-Go (USB-OTG),
and a USB-OTG cable is required.
Typical use-cases for this app are:
● Controlling an IoT device like an Arduino, ESP32, etc
● Controlling a communication device such as a router that has a serial console connector (this may require a USB to RS232 converter cable)
UsbTerminal is open-source. See https://github.com/liorhass/UsbTerminal
Features:
● Support devices with the following USB to Serial protocols/chips: CDC-ACM (e.g. Arduino Uno R3), FTDI (FT232R, FT232H, FT2232H, FT4232H,
FT230X, FT231X, FT234XD), Prolific PL2303, CH34x, Silabs CP210x (e.g. ESP32 dev boards from Espressif)
● Support two keyboard input modes:
1. Auto - Like on a “real” terminal, there is no dedicated input field. Characters are sent to the serial device immediately as keys are clicked on the keyboard. This is the default mode.
2. Dedicated input field - Keyboard input goes to a dedicated input field and is sent to the device only after a “Send” button is pressed.
● Partial support of ANSI/VT100 escape sequences including text coloring
● Two display modes: Text and Hex
● Background communication - the app can maintain connection and
continue receiving data even when it is in the background
● Log sessions to files. These log files can then be viewed or shared in
order to be analyzed with external tools
● Sending control character (e.g. Ctrl-C)
● Controlling of DTR and CTS
● Large scroll-back buffer
● Blinking cursor
● Status line indicating connection state, error messages, screen size,
cursor location and display mode
● Built-in help
● Built-in shortcuts to reset an Arduino and ESP32 dev boards
● No root required
● No special permissions required
A note to Arduino users:
One advantage of UsbTerminal is the way it handles DTR. Typically when an Arduino board is connected to a PC, it will reboot every time a terminal emulator application is connected to it. This is because the PC drops the DTR signal low whenever a connection is formed, and Arduino is designed to reset when DTR line is dropped low. UsbTerminal on the other hand, doesn’t automatically set or reset the DTR signal. When you connect a phone or tablet to an Arduino and open UsbTerminal, your Arduino continues whatever it was doing at the time. If you want it to reboot, you can easily control the DTR signal from UsbTerminal with a dedicated button.
螢幕擷取畫面
價錢
- 今天: 免費
- 最小值: 免費
- 最大值: 免費
追蹤票價
開發人員
- Lior Hass
- 平台: Android 應用程式 (4)
- 清單: 0 + 0
- 點數: 0 + 451 ¡
- 排名: 0
- 評測: 0
- 折扣: 0
- 影片: 0
- RSS: 訂閱
點數
未找到 ☹️
排名
未找到 ☹️
清單
未找到 ☹️
評測
成為第一個評論 🌟
其他資訊
- 版本: 2.0.25
- ID: com.liorhass.android.usbterminal.free
- 類別 :
Android 應用程式›工具 - OS:
Android 7.1 - 大小:
25 Mb - 內容分級:
Everyone - Google Play 評分:
4.1(451) - 發佈日期:
- 發行日期:
聯絡人
https://github.com/liorhass/UsbTerminal你可能還喜歡
-
- USB Terminal/Graphics
- Android 應用程式: 工具 由: Emrecan ÇETİN
- * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 1 + 0 版本: 1.02 This is a kind of USB Serial Terminal application that contains some graphics. Also there is a serial monitor in it. You can use this app with Arduino or another microcontroller for ... ⥯
-
- USB Terminal (Open Accessory)
- Android 應用程式: 工具 由: Jorge Prado
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.0 USB Testing - Professional USB Communication Tool Powerful USB communication app for developers, engineers, and makers working with Arduino, Raspberry Pi, and custom USB devices. Key ... ⥯
-
- Serial USB Terminal
- Android 應用程式: 工具 由: Kai Morich
- * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 2,369 (4.3) 版本: 1.56 'Serial USB Terminal' is a line-oriented terminal / console app for microcontrollers, arduinos and other devices with a serial / UART interface connected with a USB to serial converter ⥯
-
- Arduino USB Terminal (Open)
- Android 應用程式: 工具 由: superus8r
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 130 (4.8) 版本: 0.9.84277 This is an open-source app that allows sending commands to an Arduino device through USB cable. You need an Arduino to use this app (Arduino clones are also supported)! Simply connect ... ⥯
-
- ZTerminal - USB Terminal
- Android 應用程式: 工具 由: REDZ Smart Communication
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 89 (4.6) 版本: 2.0.0 ZTerminal software lets you use USB to Serial Converters based on FTDI and Prolific chips independent from converter manufacturer and control devices used in industry such as Modems, ... ⥯
-
- USB Driver for Android Devices
- Android 應用程式: 工具 由: HEXAMOB S.L.
- * 免費
- 清單: 1 + 0 排名: 0 評測: 0
- 點數: 2 + 234,763 (4.3) 版本: 3.52 USB Drive for Android phones, moreover contains software links, from manufacturer, Samsung Kies, Sony PC Companion, Lg Pc Suite ... You can find the android usb driver for PC from more ⥯
-
- USB Endoscope app Android 10+
- Android 應用程式: 工具 由: Easy Connect Apps
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 2 + 71,896 (3.6) 版本: 16-aug2025 How to connect an USB camera: Simply connect the USB camera to your smartphone's USB port. When the dialog appears, tick and press OK. It's all. You can only connect those USB cameras ... ⥯
-
- USB OTG Connector: OTG Checker
- Android 應用程式: 工具 由: The App Company INC
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 1 + 4,238 (2.6) 版本: 2.7 Manage Your USB Files Easily with OTG Connector The Ultimate USB OTG File Manager for Android! Looking for a fast and easy way to access your USB drive on your Android phone? USB OTG ... ⥯
-
- USB Connector : OTG USB Driver
- Android 應用程式: 工具 由: Era Apps Studio
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 1 + 1,578 (2.6) 版本: 3.7 OTG Connector Software For Android or USB Connector and OTG File Manager is the most advanced and simple USB OTG Explorer to Transfer File from OTG to your Android Device or from your ... ⥯
-
- USB screen cast HDMI connector
- Android 應用程式: 工具 由: Mergalo
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 2,189 (3.6) 版本: 1.2.7 You can cast a small phone screen to a large TV screen in good resolution and quickly with the aid of screen mirroring, or All Mirror. On the huge screen, it's simple to access all ... ⥯
-
- Terminal, Shell for Android
- Android 應用程式: 工具 由: A389 St.
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 480 (3.6) 版本: 2023112316r Terminal, Shell for AndroidTerminal, Shell,Command Line for android has features : +) Typing command line,shell bash, Terminal for android devices + Full Linux terminal emulation. + ... ⥯
-
- USB OTG Checker
- Android 應用程式: 工具 由: 3 Sixty Development
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.1 USB OTG Checker helps to check the compatibility with USB OTG devices. OTG or on the go USB devices can be used in the USB port of the phone via OTG USB cable. This app will help you ... ⥯
-
- Screen cast HDMI USB connector
- Android 應用程式: 工具 由: Screen Mirroring & HDMI USB TV Connector Apps
- * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 25,079 (4.3) 版本: 1.7 Screen Mirroring - All Mirror, helps you cast a small phone screen to big TV screen in high quality and real-time speed. You can easily access all types of media files, including ... ⥯
-
- USB Blocker: Antihack Security
- Android 應用程式: 工具 由: Erfan Rouhani
- * * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 2 + 278 (4.5) 版本: 5.5.11.6.25 About "USB Blocker: Antihack Security" Are you connecting your device to public chargers, unknown cables at work, or even at a friend s house? STOP You could be exposing yourself to ... ⥯