描述
Easy Installation
With the ABL Configuration App, electricians can install and configure Wallbox eM4 in just a few steps, either as a Standalone variant or part of a group installation of Wallbox eM4 Controller and Extender variants. The app allows the configuration of different network topologies with WLAN, Ethernet or LTE, depending on the specific requirements at the installation site.
Technical Configuration
With this app, technical configurations can be performed according to all electrical specifications. This includes setting the correct output power and charging settings to guarantee the smooth operation of the charging station.
Load Management
ABL Configuration also includes functions for static and dynamic load management, which can be used to optimize the power utilization of the charging infrastructure. Static load management can be used to set the maximum power output for the charging station, ensuring that the available power supply is not exceeded. With dynamic load management, on the other hand, the charging station can automatically adjust the power output to the power consumption in the building to optimize the use of the available power. This ensures that even larger charging infrastructures charge vehicles efficiently without causing disruptions to the power grid.
Establishing Connection to a Charging Backend
With the ABL Configuration App, electricians can connect to a charging backend that allows users to access additional features such as billing, remote management and more. This allows the Wallbox eM4 to integrate with other systems and services, ensuring a seamless and integrated charging experience.
Charging Management
The app allows electricians to start, stop and monitor charging processes and view the status of the charging infrastructure. In addition, RFID users can be managed for authentication, ensuring that only authorized users have access to the charging station. The app can also be used to permanently lock the charging cable in the charger.
Diagnosis
ABL Configuration includes fault diagnosis tools that allow electricians to quickly identify and fix any problems that occur at the charging station. This maintains the smooth operation of the charging stations and reduces downtime to a minimum.
OTA Software Updates
OTA software updates to the app ensure that charging stations are always up to date with the latest features and improvements.
螢幕擷取畫面
價錢
- 今天: 免費
- 最小值: 免費
- 最大值: 免費
追蹤票價
開發人員
- ABL GmbH
- 平台: Android 應用程式 (1) iOS 應用程式 (1)
- 清單: 0 + 0
- 點數: 0 + 0 ¡
- 排名: 0
- 評測: 0
- 折扣: 0
- 影片: 0
- RSS: 訂閱
點數
未找到 ☹️
排名
未找到 ☹️
清單
未找到 ☹️
評測
成為第一個評論 🌟
其他資訊
你可能還喜歡
-
- Configuration
- iOS 應用程式: 公用程式與工具 由: Clavis Sinica Limited
- * 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.0.4 Chu s Dictionary- Configuration of Chinese Characters provides the complete list of all Configuration forms used in standard Chinese Characters. According to our research of 8105 ... ⥯
-
- Kahi Configuration
- iOS 應用程式: 公用程式與工具 由: Kahi Inc.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 1 (4.0) 版本: 1.6 Kahi gives you a complete picture of where your assets are in your warehouse, while in transit, and at job sites. Configure and provision your Kahi Fixed Gateways and Tracking Beacons ... ⥯
-
- CAN2BLE Configuration
- iOS 應用程式: 公用程式與工具 由: Axiomatic Technologies Corporation
- $49.99
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.2.3 CAN2BLE Configuration is a configuration tool used for the purpose of configuring the Axiomatic CAN to Bluetooth Low Energy devices. CAN2BLE Configuration tool is a means of allowing ... ⥯
-
- Sensor Configuration
- iOS 應用程式: 公用程式與工具 由: THE WATT STOPPER, INC.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 4 (3.0) 版本: 2.0.43 Configure, test and adjust Legrand Bluetooth™ enabled sensors from your mobile device, leaving your ladder behind! The Sensor Configuration app from Legrand, allows users (electrical ... ⥯
-
- GF Configuration Tool
- iOS 應用程式: 公用程式與工具 由: Georg Fischer AG
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 2 (5.0) 版本: 2.2.5 The GF Configuration Tool allows users to configure their 2581 FlowtraMag Meter to the parameters required for their system. Users can change the flow unit, totalizer unit, averaging, ... ⥯
-
- BLEReader Configuration App
- iOS 應用程式: 公用程式與工具 由: Advanced System Technology Limited
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.0 BLEReader Configuration App is a software tool to configure the setting of AST BLE Readers. It allows the input of SiteKey & AppKey for the BLE Reader communication. The following ... ⥯
-
- SenseGiz Configuration App
- iOS 應用程式: 公用程式與工具 由: SenseGiz Inc.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.6 SenseGiz provides variety of IoT solutions. All these solutions have evolved around the same set of hardware elements such as FIND, COIN and Gateway. The configuration app helps our ... ⥯
-
- e-connect configuration
- iOS 應用程式: 公用程式與工具 由: Endepro Software, S.L.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.3.1 We work thinking on you! Our objective, to make things easier and this app helps you to configure e-connect board in a few steps. ⥯
-
- StatFeedr Configuration
- iOS 應用程式: 公用程式與工具 由: 12D Sports, Inc
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.0 This utility helps you quickly get your 12D Sports StatFeedr device connected to Wi-Fi. It uses the Bluetooth Low Energy feature of your phone or tablet to securely configure your new ... ⥯
-
- Enelion Configuration Tool
- iOS 應用程式: 公用程式與工具 由: Enelion
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.4 Enelion Lumina merges a unique slick design with a full range of smart and handy features needed in a modern electric car charger. With Lumina-dedicated App for EV charging, you can ... ⥯
-
- Ovation Configuration
- iOS 應用程式: 公用程式與工具 由: Fusion Research, Inc.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.01 Configure your Fusion Research music server... manage network settings, player names and streaming service accounts. ⥯
-
- Kappa X Configuration
- iOS 應用程式: 公用程式與工具 由: Sensoteq
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 2.1.1 Have Kappa X suit your unique asset. With over 18 million combinations the Kappa X Config App can be used to adjust: - Sensor transmission timings. - Sensor response to changes in ... ⥯
-
- Device Configuration
- iOS 應用程式: 公用程式與工具 由: Audio Enhancement
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 0 版本: 1.1.3 Easily configure your Audio Enhancement devices from your mobile phone! Install and Modify amplifiers including volume adjustments wirelessly! Easily connect your devices to the EPIC ... ⥯
-
- PayRange
- iOS 應用程式: 公用程式與工具 由: PayRange Inc.
- 免費
- 清單: 0 + 0 排名: 0 評測: 0
- 點數: 0 + 220,998 (4.7) 版本: 7.0.8 Pay with a simple swipe on your phone screen. Use PayRange to pay at thousands of vending, laundry, arcade, parking, coffee and other supported machines with a simple swipe of your ... ⥯