Προγραμματιστής: Haltech (2)
Τιμή: Δωρεάν
Κατατάξεις: 0 
Κριτικές: 0 Γράψτε μια κριτική
Λίστες: 0 + 0
Βαθμοί: 0 + 5 (5.0) ¡
App Store

Περιγραφή

Haltech Connect
Monitor channels, read and clear diagnostic trouble codes, see and change settings. Perform initial setup of your Rebel ECU. This app allows you to connect to your Wi-Fi enabled Haltech Nexus ECU. In it you can view any channel as you would do within NSP, and change most settings and table contents. It also allows you to view diagnostic trouble codes (DTCs) and clear them, as well as configuration errors such as a setting value out of range. You can choose from a range of metric and imperial units. If you have a Rebel ECU, you can use this app to access the setup wizard to configure your ECU for the first time. Note: Nexus firmware version 1.26 or later is required to use the mobile app. This can be updated using NSP.
Περισσότερα ↓

Στιγμιότυπα οθόνης

#1. Haltech Connect (iOS) Με: Haltech
#2. Haltech Connect (iOS) Με: Haltech
#3. Haltech Connect (iOS) Με: Haltech
#4. Haltech Connect (iOS) Με: Haltech
#5. Haltech Connect (iOS) Με: Haltech

Τι νέο υπάρχει

  • Εκδοχή: 1.6.0
  • Ενημερώθηκε:
  • Bluetooth support added. Requires ECUs with V1.31.0 Release firmware or newer
    Supports DTCs reporting for ECUS with V1.32.0 Release firmware or newer
    Fixed issues throttle calibration process.
    Fixed issues rendering gauges on channels that are not available.
    Fixed issues with the starting tests in the checklist

Τιμή

  • Σήμερα: Δωρεάν
  • Ελάχιστο: Δωρεάν
  • Μέγιστο: Δωρεάν
Παρακολούθηση τιμών

Προγραμματιστής

Βαθμοί

0 ☹️

Κατατάξεις

0 ☹️

Λίστες

0 ☹️

Κριτικές

Γίνε ο πρώτος που θα αξιολογήσει 🌟

Πρόσθετες πληροφορίες

Haltech ConnectHaltech Connect URL μικρού μήκους: Αντιγράφηκε!
  • 🌟 Κοινή χρήση
  • App Store

Μπορεί επίσης να σας αρέσει

Μπορεί επίσης να σας αρέσει

Τελεστές αναζήτησης που μπορείτε να χρησιμοποιήσετε με το AppAgg
Προσθήκη στο AppAgg
AppAgg
Ξεκινήστε - είναι δωρεάν.
Εγγραφή
Είσοδος