開發人員: Nitrio (114)
價錢: $2.99
排名: 0 
評測: 0 寫評論
清單: 0 + 0
點數: 0 + 4 (3.3) ¡
App Store

描述

Transformer Calculator Plus
Transformer Calculator calculate any parameter within the transformer equation, including primary and secondary voltage, current, and turns.

Transformer Calculations Include:
Transformer Turns Ratio – Current and Turns
Transformer Turns Ratio – Voltage and Turns
Transformer Turns Ratio – Voltage and Current
The result will indicate whether the transformer is step-up or step-down.

Transformers are primarily used as power converters. The two types—step-up and step-down—operate on the same principle but in opposite directions. A step-up transformer converts a lower AC voltage to a higher voltage, while a step-down transformer reduces a higher AC voltage to a lower level. For example, if a country uses 110 V power, a step-up transformer converts it to 220 V, and a step-down transformer does the reverse. Both work with alternating current (AC).

A transformer consists of a soft iron core with two coils wound around it, which are not electrically connected. These coils may be wound on separate limbs of the iron core or placed one over the other.

The coil to which the alternating voltage is applied is called the primary coil or primary winding. When an alternating voltage is applied, the resulting alternating current in the primary winding generates a changing magnetic field. This changing field induces an alternating current in the secondary coil. The magnitude of the induced voltage depends on the number of turns in the secondary winding.

All transformers have a nameplate rating. It is best to operate them within the voltage limits specified. Using a step-down transformer below its rated limit can support a wide range of applications, but exceeding the specified limit is dangerous and may cause electrical failure.

The relationship between voltage, current, and the number of turns in each coil is given by:

Vp/Vs = Np/Ns = Is/Ip

Where:
Vp – Primary voltage
Vs – Secondary voltage
Np – Primary turns
Ns – Secondary turns
Ip – Primary current
Is – Secondary current

Thank you for your support, and please visit nitrio.com for more apps for your iOS devices.
更多 ↓

螢幕擷取畫面

#1. Transformer Calculator Plus (iOS) 由: Nitrio
#2. Transformer Calculator Plus (iOS) 由: Nitrio
#3. Transformer Calculator Plus (iOS) 由: Nitrio
#4. Transformer Calculator Plus (iOS) 由: Nitrio
#5. Transformer Calculator Plus (iOS) 由: Nitrio
#6. Transformer Calculator Plus (iOS) 由: Nitrio
#7. Transformer Calculator Plus (iOS) 由: Nitrio
#8. Transformer Calculator Plus (iOS) 由: Nitrio
#9. Transformer Calculator Plus (iOS) 由: Nitrio
#10. Transformer Calculator Plus (iOS) 由: Nitrio

新功能

  • 版本: 1.2
  • 發佈日期:
  • - Updated for the newest devices.
    - Minor bugs fixed.

價錢

  • 今天: $2.99
  • 最小值: $2.99
  • 最大值: $2.99
追蹤票價

開發人員

點數

0 ☹️

排名

0 ☹️

清單

0 ☹️

評測

成為第一個評論 🌟

其他資訊

聯絡人

Transformer Calculator PlusTransformer Calculator Plus 縮短網址: 已複製!
  • 🌟 分享
  • App Store

你可能還喜歡

你可能還喜歡

可搭配 AppAgg 使用的搜尋運算子
添加到 AppAgg
AppAgg
立即免费注册
註冊
登入