| Vývojář: | Brain_trapp (13) | ||
| Cena: | * * Zdarma | ||
| Hodnocení: | 0 | ||
| Recenze: | 0 Napsat recenzi | ||
| Seznamy: | 0 + 0 | ||
| Body: | 0 + 316,135 (4.5) ¡ | ||
| Body +1 | |||
Popis
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
Snímky obrazovky
Novinky
- Verze: v4.35.7
- Aktualizováno:
- v4.35.7
* Dark mode enhanced
* Layout changes for tablets
* Bug fixes and enhancements
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
Cena
-
* Obsahuje reklamy* Nákupy v aplikaci - Dnes: Zdarma
- Minimální: Zdarma
- Maximální: Zdarma
Sledovat ceny
Vývojář
- Brain_trapp
- Platformy: Android Aplikace (13)
- Seznamy: 0 + 0
- Body: 2 + 326,165 ¡
- Hodnocení: 0
- Recenze: 0
- Slevy: 0
- Videa: 0
- RSS: Odebírat
Body
Nenalezeno ☹️
Hodnocení
Nenalezeno ☹️
Seznamy
Nenalezeno ☹️
Recenze
Buďte první, kdo bude hodnotit 🌟
Další informace
- Verze: v4.35.7
- ID: com.gombosdev.ampere
- Kategorie:
Android Aplikace›Nástroje - OS:
Android 6.0 a vyšší - Velikost:
23 Mb - Hodnocení obsahu:
Everyone - Google Play Hodnocení:
4.5(316,135) - Aktualizováno:
- Datum vydání:
Kontakty
https://project-9114377732102489723.firebaseapp.com/Mohlo by se Vám také líbit
-
- Ampere
- Android Aplikace: Nástroje Podle: Ampere Tech
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 154 (1.7) Verze: 1.6 The Ampere App amps up the functionality of Ampere products like Shower Power and Dusk. In addition, the app allows customers to register products, join our membership program, and ... ⥯
-
- Ampere and charger tester
- Android Aplikace: Nástroje Podle: AppsLib
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.10.0 Ampere and Charger Tester, your trusty sidekick for tracking your device's charging performance in style! Key Features : Real-Time Charging Info: Curious about how your device is ... ⥯
-
- Ampere : Charger Tester
- Android Aplikace: Nástroje Podle: toolso
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.3 Bad Charger can cause damages to your phone, If the charging current is too high then it can effect your phones battery in bad ways. Did you ever felt, that one Charger/USB cable set ... ⥯
-
- Ampere Meter : Battery Chargin
- Android Aplikace: Nástroje Podle: BRB Apps
- * * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 410 (3.4) Verze: 1.28 Ampere meter will inform you that how much mAH charging current is being received when you will put on charge your phone. It will give you many information of your device battery ... ⥯
-
- Ampere Pro - Battery Monitor
- Android Aplikace: Nástroje Podle: nanegate
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 2 + 0 Verze: 2.1 Ampere Pro is an advanced battery monitoring tool designed to provide real-time data on your device s battery performance and charging status. Battery Charging Speed: Displays ... ⥯
-
- Ampere Battery Charging Meter
- Android Aplikace: Nástroje Podle: Stupendous Andro
- * * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 802 (3.1) Verze: 1.7 While charging your phone this app will inform you that how much mAH charging battery current is received and battery information. Ampere Meter is battery current measure to know the ... ⥯
-
- Ampere Pro
- Android Aplikace: Nástroje Podle: Nguyễn Thị Mai Trang
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 2.1 Disclaimer : The Ampere Pro app uses a software algorithm that retrieves information about battery condition, battery charge and discharge current, and battery quality! All parameters ... ⥯
-
- Ampere Meter (Charging Ampere)
- Android Aplikace: Nástroje Podle: robin android
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 167 (2.4) Verze: 1.0 It measures the charging current Try to check if charging is slow measuring the charging current For fast charging will be measured more than 1.0 A If the charging current is "-. A" is ⥯
-
- Ampere Battery Info
- Android Aplikace: Nástroje Podle: Codelaby
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 249 (3.9) Verze: 0.2.7 Get real-time battery values for your device, check the charging or discharging status, and the type of charging system - USB port, wireless charging pad, or power adapter. Our app ... ⥯
-
- Ampere viewer
- Android Aplikace: Nástroje Podle: israel develop
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.5 this app is for a use to see how fast your battery get current we display it in mAh and watts see all the data you need from your battery ⥯
-
- Battery Charger Taster: Ampere
- Android Aplikace: Nástroje Podle: Battery Pro Apps
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 1 + 738 (4.1) Verze: 1.2.4 Introducing Ampere Meter - Battery Monitor, showcases battery usage details and determines battery capacity (mAh) through scientific methods.. CHARGE SPEED With Ampere Meter, you can ... ⥯
-
- Charger Tester & Ampere Meter
- Android Aplikace: Nástroje Podle: Minim Dev.
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 385 (4.2) Verze: 1.9.5 Are you tired of guessing how fast your device is charging or wondering whether your charger is delivering the advertised amperage? Say goodbye to the uncertainty with the Ampere Meter ⥯
- Novinka
- Battery Charge Meter: Ampere
- Android Aplikace: Nástroje Podle: AS Studio INC
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.0 Keep your device's battery performance in check with our Battery Charge Meter & Battery Monitoring app. Whether you're Tracking Charging Speed, Voltage Ampere & Overall Battery ... ⥯
-
- Amps & Watts Calculator
- Android Aplikace: Nástroje Podle: Furyload
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 1 + 0 Verze: 1.1.2 Ampere and Watt Calculator is a small tool for converting between watts and amps based on the specified and required voltages. What do you benefit from this application? 1-Convert ... ⥯