| Udvikler: | Brain_trapp (5) | ||
| Pris: | * * Gratis | ||
| Rangeringer: | 0 | ||
| Anmeldelser: | 0 Skriv en anmeldelse | ||
| Lister: | 0 + 0 | ||
| Point: | 0 + 324,157 (4.5) ¡ | ||
| Google Play | |||
Beskrivelse
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
Skærmbilleder
Nyheder
- Version: v4.35.11
- Opdateret:
- v4.35.11
* Current measurement range extended to 20A
* Languages (translations) enhanced
* Experimental option: Show charging/discharging power in watts
* Bug fixes
Ampere FAQ: http://goo.gl/R8XgXX
See also: Settings => About Ampere => Change history
Note: If Ampere gets stuck in "measuring" after a firmware update, clear the app cache:
1. Open "Android Settings" => "Apps" => "Ampere"
2. Clear all data under Storage
3. Restart Ampere
Pris
-
* Indeholder annoncer* Indkøb i appen - I dag: Gratis
- Minimum: Gratis
- Maksimalt: Gratis
Overvåg priser
Udvikler
- Brain_trapp
- Platforme: Android Apps (5)
- Lister: 0 + 0
- Point: 2 + 332,444 ¡
- Rangeringer: 0
- Anmeldelser: 0
- Rabatter: 0
- Videoer: 0
- RSS: Abonner
Point
0 ☹️
Rangeringer
0 ☹️
Lister
0 ☹️
Anmeldelser
Vær den første til at gennemgå 🌟
Yderligere oplysninger
- Version: v4.35.11
- Kategori:
Android Apps›Værktøjer - Operativsystem:
Android 6.0 - Størrelse:
23 Mb - Indholdsklassificering:
Everyone - Google Play Bedømmelse:
4.5(324,157) - Opdateret:
- Udgivelsesdato:
Kontaktpersoner
https://project-9114377732102489723.firebaseapp.com/Ampere Kort webadresse: Kopieret!- 🌟 Del
- Google Play
Du vil måske også kunne lide
-
- Ampere
- Android Apps: Værktøjer Ved: Ampere Tech
- Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 159 (1.7) Version: 1.6 The Ampere App amps up the functionality of Ampere products like Shower Power and Dusk. In addition, the app allows customers to register products, join our membership program, and ... ⥯
-
- Ampere and charger tester
- Android Apps: Værktøjer Ved: AppsLib
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 0 Version: 1.10.1 Ampere and Charger Tester, your trusty sidekick for tracking your device's charging performance in style! Key Features : Real-Time Charging Info: Curious about how your device is ... ⥯
-
- Ampere : Charger Tester
- Android Apps: Værktøjer Ved: toolso
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 0 Version: 1.3 Bad Charger can cause damages to your phone, If the charging current is too high then it can effect your phones battery in bad ways. Did you ever felt, that one Charger/USB cable set ... ⥯
-
- Ampere Battery Pro Charger
- Android Apps: Værktøjer Ved: nanegate
- * * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 2 + 0 Version: 4.3 Ampere Battery Pro Charger Real Time Battery Health & Power Monitor Ampere Battery Pro is a precise and feature-rich battery monitoring app that helps you track your device s battery ... ⥯
-
- Ampere Meter : Battery Chargin
- Android Apps: Værktøjer Ved: BRB Apps
- * * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 452 (3.1) Version: 1.29 Ampere meter will inform you that how much mAH charging current is being received when you will put on charge your phone. It will give you many information of your device battery ... ⥯
-
- Ampere Battery Charging Meter
- Android Apps: Værktøjer Ved: Stupendous Andro
- * * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 1,099 (3.0) Version: 1.9 Monitor, Optimize & Protect Your Battery All in One App! Take full control of your phone s battery with Ampere Battery Charging Meter the battery monitoring & optimization app. Easily ... ⥯
-
- Ampere Meter (Charging Ampere)
- Android Apps: Værktøjer Ved: robin android
- Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 189 (3.0) Version: 1.0 It measures the charging current Try to check if charging is slow measuring the charging current For fast charging will be measured more than 1.0 A If the charging current is "-. A" is ⥯
-
- Ampere Battery Info
- Android Apps: Værktøjer Ved: Codelaby
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 306 (3.9) Version: 0.2.7 Get real-time battery values for your device, check the charging or discharging status, and the type of charging system - USB port, wireless charging pad, or power adapter. Our app ... ⥯
-
- Ampere viewer
- Android Apps: Værktøjer Ved: israel develop
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 0 Version: 1.5 this app is for a use to see how fast your battery get current we display it in mAh and watts see all the data you need from your battery ⥯
-
- Battery Charger Taster: Ampere
- Android Apps: Værktøjer Ved: Battery Pro Apps
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 1 + 771 (4.2) Version: 1.2.6 Introducing Ampere Meter - Battery Monitor, showcases battery usage details and determines battery capacity (mAh) through scientific methods.. CHARGE SPEED With Ampere Meter, you can ... ⥯
-
- Charger Tester & Ampere Meter
- Android Apps: Værktøjer Ved: Minim Dev.
- * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 744 (4.1) Version: 2.0.1 Are you tired of guessing how fast your device is charging or wondering whether your charger is delivering the advertised amperage? Say goodbye to the uncertainty with the Ampere Meter ⥯
-
- IR Remote for Ampere tv
- Android Apps: Værktøjer Ved: Rara apps
- Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 0 Version: 1.0 IR Remote for Ampere TV is a simple and reliable infrared (IR) remote controller designed specifically for Ampere brand televisions. If your physical remote is lost, damaged, or out of ⥯
-
- Charge Speed Monitor : Ampere
- Android Apps: Værktøjer Ved: SysLab
- * * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 23 (5.0) Version: chargesm_1.0.4 Is your charging cable fast enough? Don't let a slow charger waste your time. Charge Speed Monitor is the ultimate tool to analyze your battery charging performance in real-time. Check ⥯
-
- Charge Watt Meter & Ampere+
- Android Apps: Værktøjer Ved: Tirin
- * * Gratis
- Lister: 0 + 0 Rangeringer: 0 Anmeldelser: 0
- Point: 0 + 220 (3.4) Version: 1.1.3 Keep your device's battery performance in check with our all-in-one battery monitoring app. Whether you're tracking charging speed, voltage, temperature, or overall battery health, our ⥯