| 개발자: | Precitec GmbH & Co. KG (3) | ||
| 가격: | 무료 | ||
| 순위: | 0 | ||
| 리뷰: | 0 리뷰 작성 | ||
| 댓글: | 0 댓글 게시 | ||
| 목록: | 0 + 0 | ||
| 포인트: | 0 + 0 ¡ | ||
| Google Play | |||
기술
• Connection: shows active Bluetooth devices in the network
• Temperature: shows the sensor values of the four temperature sensors
• Pressure: shows cutting gas pressure and purging air pressure
• Optics: looks different, because of different laser head types
- Normal: focal positions, potentiometer offset, diffused light, lens configuration.
- ZoomCutter: aspect ratio replaces the lens configuration.
- Manual: just diffused light is shown.
• Errors: shows active error messages. If no error exists, the screen is empty.
• IO: shows the IO-interface, with analogue voltages, currents and signals.
• System: laser head firmware version and serial number.
Besides, in the system window there is a button. This button starts the record of the measurement values. The measurement values are stored in a *.csv file, which is created in the memory of the used device. The App has two access modes, USER and OEM. The determination is regulated through two different PINs. Users with USER-rights can define the memory location and the sampling rate of the .csv file. Besides the USER can change his own PIN. The OEM can additionally configure thresholds for the laser head. Furthermore the OEM can change his own and the USER-PIN.
The functionality of the app could be restricted, because of different laser head firmware versions. The IO window is not supported with firmware lower than 2.0.0. Also the one-time PIN algorithm is not supported for firmware versions below 2.0.3. With this algorithm a one-time change of your PIN is possible, when the PIN was forgotten or wrong entered.
The App works just as a display when the laser head is connected through CAN. It is not possible to change any thresholds with the App and the IO window is hidden.
The manuals in English and German versions are delivered in the pdf-format within the app. During the first start of the app, after approving the GTC, both versions of the manuals will be stored in the download-section of the used device. Besides it is possible to open the manual in the settings of the app. Depending on the used language in the device the German or English version will be shown. To display the manuals a pdf-viewer is required.
Ad
스크린샷
새로운 기능
- 버전: 3.3.7
- 업데이트:
가격 내역
- 오늘: 무료
- 최소: 무료
- 최대: 무료
가격 추적
Ad
개발자
- Precitec GmbH & Co. KG
- 플랫폼: Android 앱 (3)
- 목록: 0 + 0
- 포인트: 0 + 0 ¡
- 순위: 0
- 리뷰: 0
- 댓글: 0
- 할인: 0
- 동영상: 0
- RSS: 구독
포인트 (0)
0 ☹️
순위 (0)
0 ☹️
목록 (0)
0 ☹️
- Precitec ProCutter
리뷰 (0)
첫 번째 리뷰를 남겨보세요 🌟
댓글 (0)
가장 먼저 댓글을 남겨주세요 🌟
추가 정보
주소록
- 웹사이트:
http://www.precitec.de
«Precitec ProCutter». 플랫폼: Android. 카테고리: 도구. 개발자: «Precitec GmbH & Co. KG». 첫 번째 릴리스: . 마지막 업데이트: . 현재 가격: 무료. 이 타이틀은 아직 AppAgg에서 평가나 리뷰를 받지 못했습니다. AppAgg는 «Precitec ProCutter»의 가격 기록, 평점 및 사용자 피드백을 추적합니다. 향후 할인 및 업데이트 받기: RSS에서 확인할 수 있습니다. AppAgg는 애플리케이션을 호스팅하거나 소프트웨어를 배포하지 않습니다. 모든 상표, 로고 및 스크린샷은 해당 소유자의 자산입니다.
Precitec ProCutter 단축 URL: 복사됨!- 🌟 공유하기
- Google Play
당신은 또한 같은 수 있습니다
-
- Precitec ProCutter 2.0 Firmwar
- Android 앱: 도구 게시자: Precitec GmbH & Co. KG
- 무료
- 목록: 0 + 0 순위: 0 리뷰: 0
- 포인트: 0 + 0 댓글: 0 버전: 2.0.5 The Firmware Update App is used to update ProCutter Standard and ProCutter ZOOM using an encrypted firmaware file. The connection is via WLAN and has the same requirements as the ... ⥯
-
- Precitec ProCutter 2.0
- Android 앱: 도구 게시자: Precitec GmbH & Co. KG
- 무료
- 목록: 0 + 0 순위: 0 리뷰: 0
- 포인트: 0 + 0 댓글: 0 버전: 2.2.3 The Precitec ProCutter 2.0 App is used to visualize the state of the laser head during operation, to query error messages and to set the customer offset. Optionally, the app can also ... ⥯