Vývojář: | Markus Resch (4) | ||
Cena: | Zdarma | ||
Hodnocení: | 0 | ||
Recenze: | 0 Napsat recenzi | ||
Seznamy: | 0 + 0 | ||
Body: | 0 + 3 (3.0) ¡ | ||
App Store |
Popis

The Rev 2 Micro is the revision without the SD slot in the back. On the Rev 1 the SD slot is between the Midi jacks and the Phones jack. The Rev 1 needs to be updated with an SD card. Please contact us via our Instagram page.
NOTE: This app is only intended for updating the firmware, i.e. operating system. It will not change the sounds of your Micro. The Micro is not designed to have the sounds updated, neither via SD cards nor via Bluetooth.
A full update of all the parts of the firmware will take ca 30 seconds. Only the parts of the firmware where the text is in green need to be updated.
The parts that have red text don't have to be updated, and you can select "No".
NOTE: This app will only transfer the firmware to the Micro's Bluetooth circuit. You will need to re-start your micro to do the actual update. Please follow the instructions in the app and on the screens of the Micro.
NOTE: You will need an IP5S or later to use this app.
Snímky obrazovky

Cena
- Dnes: Zdarma
- Minimální: Zdarma
- Maximální: Zdarma
Sledovat ceny
Vývojář
- Markus Resch
- Platformy: iOS Aplikace (4)
- Seznamy: 1 + 1
- Body: 2 + 36 ¡
- Hodnocení: 0
- Recenze: 0
- Slevy: 0
- Videa: 0
- RSS: Odebírat
Body
Nenalezeno ☹️
Hodnocení
Nenalezeno ☹️
Seznamy
Nenalezeno ☹️
Recenze
Buďte první, kdo bude hodnotit 🌟
Další informace
- Verze: 2.0
- ID: com.markusresch.theMellotronUpdater
- Kategorie:
iOS Aplikace
›Utility
- OS:
iPad
,iPhone
,iOS 12.0 a vyšší
- Velikost:
34 Mb
- Podporovaný jazyk:
English
- Hodnocení obsahu:
4+
- App Store Hodnocení:
3.0
(3) - Aktualizováno:
- Datum vydání:
Mohlo by se Vám také líbit
-
- McIntosh Updater
- iOS Aplikace: Utility Podle: McIntosh Laboratory, Inc.
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.0 The McIntosh Updater app can be used to check and update the firmware on the McIntosh RS200 Wireless Loudspeaker System. Designed for a modern streaming lifestyle, the RS200 comes ... ⥯
-
- HFC Updater
- iOS Aplikace: Utility Podle: WISI Communications GmbH & Co. KG
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.1.7 WISI HFC Updater is a basic toolset for smartphones and tablets to manage firmware versions. Release 1.0.0 supported devices: - VX26/29B amplifiers - VX5xB amplifier - LR2x RFoG & HFC ... ⥯
-
- ID Lock Updater
- iOS Aplikace: Utility Podle: ID Lock AS
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.4.1 The ID Lock Updater app is meticulously crafted to ensure seamless integration with your ID Lock, providing efficient firmware updates and feature enhancements. Utilizing ... ⥯
-
- c-Max Updater
- iOS Aplikace: Utility Podle: MaxLite
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 2 (5.0) Verze: 1.2.4 The c-Max OTA Updater app allows the user to perform an over-the-air update to the firmware of the c-Max Network Control devices that include sensors, network nodes, powerpacks and ... ⥯
-
- Hypoxic BLU2 Updater
- iOS Aplikace: Utility Podle: HYPOXIC
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.0.0+53 Keep your Hypoxic BLU2Pro and BLU2Lite camera indicators running at their best with the official firmware updater app. Built for professionals, this app ensures your gear stays current ⥯
-
- Alert Road Updater
- iOS Aplikace: Utility Podle: Shadow Stealth
- * Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 2.0.0 With this tool you can update your Alert Road V3 device without having to connect it to your PC. Free for 12 months. ⥯
-
- ACLE Updater
- iOS Aplikace: Utility Podle: Amix Capital Limited
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.3 Airconsole LE is a Bluetooth Low Energy to RS232 Serial adaptor. This app can be used to discover, configure and perform firmware updates for your Airconsole LE device. This App is not ⥯
-
- SmartVide Firmware Updater
- iOS Aplikace: Utility Podle: Sammic
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 1.1.3 This App helps you install Firmware Updates on your SmartVide 5/7/9, the renowned Professional Sous-Vide Cooker by Sammic, whenever new versions of the Firmware become available. ⥯
-
- iTi Updater
- iOS Aplikace: Utility Podle: Interactive Technologies, Inc. (KS)
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 4 (1.0) Verze: 2.15 Use this application to upgrade your Interactive Technologies Bluetooth-enabled products. The application provides a list of available firmware ugprades and gives details as to what ... ⥯
-
- PCI Updater
- iOS Aplikace: Utility Podle: Precision Circuits, Inc.
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 2 (1.0) Verze: 1.32 Performs a firmware update to Precision Circuits Digi-level controller. ⥯
-
- TireMinder Updater
- iOS Aplikace: Utility Podle: Minder Research, Inc.
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 3 (5.0) Verze: 1.2.1 Update your TireMinder Bluetooth Adapter or A1AS to the latest version. ⥯
-
- StellarMate
- iOS Aplikace: Utility Podle: Ikarus Astronomy Company For Scientific Instruments & Tools
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 19 (3.4) Verze: 2.7.70 Use StellarMate App to discover and connect to your StellarMate controller. Control StellarMate functions and access the Web Manager and Web based VNC Viewer. Join StellarMate to your ... ⥯
-
- MCS BLEUpdater
- iOS Aplikace: Utility Podle: Medical Computer Systems, LTD
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 0 Verze: 2.0.15 The BLE Updater application is designed to update software on devices manufactured by Medical Computer System. ⥯
-
- Wible
- iOS Aplikace: Utility Podle: Rupak Poddar
- Zdarma
- Seznamy: 0 + 0 Hodnocení: 0 Recenze: 0
- Body: 0 + 1 (5.0) Verze: 2.4.0 Wible is your ultimate wireless toolkit for microcontroller communication, control, and now firmware updates. Whether you're a hobbyist, maker, or embedded developer, Wible transforms ... ⥯